Mirraflex Edge-Hardened:

These bronze edge-hardened rules have the same type of machined smooth edge as the Mirracut through-hardened rules but give an extremely high degree of ductility combined with a very hard cutting edge. They are supplied in two body hardnesses and are available in 1, 2 and 3 point thicknesses in heights up to 28.58mm (11/8”).

Also available in short lengths.

Edge-Hardened

Top of Page

Mirraflex / CW:

For general carton work and for use in dies involving really sharp bends (it will respond to practically every demand made upon it in this respect, whilst giving a performance equal to the best extra hard cutting rule)

Also available in short lengths.

Edge-Hardened

Top of Page

Mirraflex / HB:

Which has exactly the same high edge hardness but has a harder body more suitable for the really heavy boards and for the die cutting of corrugated cases and fittings. Not quite so amenable to really acute bending but still wonderfully ductile and ideal for this type of work.

Also available in short lengths.

Edge-Hardened

Top of Page

Euroflex Hi-Tek:

This rule has a very hard cutting edge and a good firm body with good bendability enhanced by special treatment during hardening and tempering.

Also available in short lengths.

Edge-Hardened

Top of Page

Flexicut Edge-Hardened:

This rule has a ground edge and an edge hardness equal to a hard rule, its ductility has been proven to be exceptional. Particularly useful where the properties of the Mirraflex rules are not required. Available in the same range of heights and lengths as the Mirraflex rules.

Also available in short lengths.

Edge-Hardened

Top of Page

Home Page: www.decimalrule.co.uk